Parrot CK3100 Installation Manual page 14

GOLF VI
Faire le montage inverse en respectant l'ordre suivant:
1 – Re-fit the panel next to the dashboard.
2 – Re-fit the panel on the left-hand side of the dashboard.
3 – Re-fit the storage compartment under the steering wheel.
4 – Re-connect and refit the cabin light. (screws 1 and 2.)
5 – Re-fit the cabin light panel.
6 – Re-fit the vanity light.
7 – Re-fit the 4 screws (7, 8, 9 and 10) for the air conditioning control unit.
8 - Put the air condition control unit panel back in to place.
9 – Re-connect the adaptor and the aerials behind the car stereo and slip them
inside the housing. (Make sure that you do not trap and cut any screen wires.)
10 – Re-fit the 4 screws (3, 4, 5 and 6) for the car stereo.
11 - Put the stereo surround back into place.
12 – Re-test to check that the system is working correctly.
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Remontage