Watching; Turn Power On - Panasonic Viera TC-L32X5X Owner's Manual

Watching TV
SLEEP
OK
OPTION
■
Other Useful Functions
Listen with SAP (Secondary Audio Programming)
■
Select the Audio mode for watching TV
Digital mode
Press [SAP] to select next Audio track (if available) when receiving a digital channel.
Audio track 1 of 2
Analog mode
Press [SAP] to select the desired Audio mode.
• Each press of [SAP] will change the Audio mode. ("Stereo" / "SAP" / "Mono")
●
●
Closed Caption
■
Press [CC] to cycle through the Closed Caption modes
Digital TV
• "Off " / "Service1 - 6"
Analog TV:
• "Off " / "CC1 - 4" / "TEXT1 - 4"
●
●
●
14

Turn power on

(Remote)
Select a channel number
• Also available side [CH] button on the unit.
For Cable/Satellite box connection
- Use your connected box's remote control.
Note
●
Reselect "Cable" or "Antenna" in "ANT in" of "TV" settings menu to switch the signal
reception between cable TV and antenna (p. 13,32).
●
The channel number and volume level remain the same even after the TV is turned
off.
(English)
SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.
Contact your Cable or Satellite operator for instructions on enabling SAP with their box.
Closed Caption is not available when watching TV with a Cable or Satellite box connected via HDMI.
Contact your Cable or Satellite operator for instructions on enabling CC with their box.
Closed Caption settings are memorized in "Closed caption" of "Setup" menu.
(TV)
or
up
or
down
Note
●
Please select correct input
(p. 17)
■
To directly enter the digital channel
number
When tuning to a digital channel,
press the button to enter the minor
number in a compound channel
number.
example: CH15-1: