Parrot CK3100 Series Installation Manual page 4

PARTNER
1
Insert the removal tools into the
slots on each side of the radio.
3
Using the plastic trim tools, unclip
and remove the storage
compartment from the centre
console. (Do not disconnect it.)
5
Using the plastic trim tools,
unclip the top of the glove box
(Do not remove it.)
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
Disassembly 1 / 2
Unclip, pull and lift the radio
disconnecting the antenna
connector.
2 3
1
Remove screws 1, 2, 3 and 4
located above the glove box.
Using the plastic trim tools, unclip
the clip located on the left side of
the dashboard.
2
4
4
6