Parrot CK3100 Series Installation Manual page 6

CLASS M / ML
1
Using a guide, pass an electric
wire from the cigarette lighter to
the underneath of the air
conditioning control housing
Make a pigtail connection (or use
the jumper) to the
BLACK/YELLOW wire.
9
3
For the Audio 5 car radio (also
applies to PC000033AA), swap
the fuses on the kit's original
connector. (i.e. the red and
orange wires) Cut the red wire
between the fuse holder and the
ISO connector, then connect to
the ACC wire.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
Finding an ACC wire
OR
Attach the electric wire and
insulate with electrical tape. (With
the Multimeter, check that the
+12V is properly controlled by the
key.)
4
For adaptor 84099, (Mki range
only) connect the ACC wire with
a male round terminal to the
blue wire at the front of the fuse
holder.
2
10