Parrot CK3100 Series Installation Manual page 12

GOLF PLUS
2
Make a hole in the card holder
using a drill bit or reamer. Then
feed the screen cable through.
4
Feed the cable behind the radio
slide.
5
Slide the screen onto its bracket.
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Fitting the hands-free system 2 / 2
Pass the cable through the hole
in the vent surround.
After replacing everything, glue
the screen bracket onto the card
holder, taking care to block the
hole through which the cable
passes.
3
4
12