Using The Audio Cover; Fitting The Audio Cover; How To Detach The Audio Cover From The Main Unit; Hands-Free Microphone And Light Sensor - TomTom Eclipse AVN4429 Owner's Manual

Using the Audio Cover

■ Using the Audio Cover
We recommend that you use the audio cover
for this receiver after removing the PND. The
audio cover is optional.

■ Fitting the Audio Cover

Mount the left end of audio cover on
1
this receiver.
● Engage the catch at the left end of the
Audio Cover with the lock on the main unit.
Mount the entire Audio Cover on this
2
receiver.
● Press the right-hand side of Audio Cover
so that it fits and clicks.
■ How to Detach the Audio Cover
from the Main Unit
1
Press the [Release] button.
● This removes the right edge of the audio
cover from the main unit.
2
Remove the audio cover.
● Hold the audio cover on the right side, lift it
up and pull it toward you to remove it.
21
Hands-Free Microphone
and Light Sensor
The PND is equipped with a built-in hands-
free microphone and a light sensor. For
details on how to use the hands-free call
function or configure light sensor settings,
refer to the operation manual of the PND.
IMPORTANT
● Pressing a sharp object against the hands-
free microphone or the light sensor may
damage them.
● If you are hard to hear the voice during
hands-free calling, adjust the front panel
tilting angle and try to direct the
microphone toward you.
Built-in hands-free microphone
Light sensor
21