Parrot CK3100 Installation Manual page 12

PASSAT 2011
2
Using the plastic trim tools, unclip
the panel to the right of the
instrument cluster without
removing it.
3
Clean the right-hand side of the
instrument cluster panel and
glue on the (included) joint.
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Fitting the hands-free system 2 / 2
Feed the cable through the top
and clip the panel back into place,
being careful not to cut the cable.
3
12