Maytag JET CLEAN II JDB1100AW Service Manual page 44

Service and Disassembly Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit and discharge
capacitor through a 10,000 ohm resistor before attempting to service, unless test procedures require power to be
connected. Ensure all ground wires are connected before certifying unit as repaired and/or operational.
15. Remove Chopper Sleeve by using Impeller as a
wrench. Lock motor rotation using the access hole
provided in back of motor.
16. Lift off Seal Seat Assembly.
©2004 Maytag Appliances Company
!
WARNING
16022783 Rev. 0 44