The Buttons - Parrot CK3100 Series Installation Manual

DUSTER
1
2
This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without
the authorisation of Parrot SA. Pictures for information only.
Fitting the hands-free system 1 / 2
On the kit connector (supplied), reverse the
fuses (i.e. swap the yellow and orange wires)
and connect the cable assembly to the blue box
as shown in the diagram below. Test everything
...then store the box in the radio housing behind
before reassembling...

the buttons

ISO
adapter