Linksys WRT54G3GV2-VF Quick Installation page 9

D.
The Power LED will flash for about
a minute during the self-test. It will
be solidly lit when the self-test is
complete.
If the Power LED does not stop
flashing, refer to "Appendix A:
Troubleshooting" in the User Guide
on the CD-ROM.
Click Next.
E.
Follow the on-screen instructions to complete the setup and configuration.
NOTE:
Advanced Configuration" in the User Guide on the CD-ROM.
For advanced configuration changes, refer to "Chapter 3:
3G/UMTS Broadband Only
Check the Router's Status Check the Router's Status