Show Firewall - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > show firewall

show firewall

This command displays the status of each Ethernet application service port.
■
Syntax
show firewall
■ Parameter
No parameters.
■ Output
# MNT Port
# http
# https
# telnet
# SSH
# Maintenance-Secure [Closed]
# ICMP
# SNMP
# RCIL
# IP Redirect Test
#
# RMT Port
# http
# https
# telnet
# SSH
# Maintenance-Secure [Closed]
# ICMP
# SNMP
#
# FST Port
# http
# https
# telnet
# SSH
# Maintenance-Secure [Closed]
# ICMP
MNT port: Maintenance Ethernet port. RMT port: Remote Ethernet port. FST port: FST Ethernet port. The port
status of application service http, https, telnet, SSH, ETERNUS Maintenance Secure, ICMP, SNMP, RCIL (MNT
port only), and IP forwarding (MNT port only) are displayed respectively. [Open ] indicates that the port is
opened. [Closed] indicates the port is closed.
FST port information is not supported in ETETNUS DX80 S2/DX90 S2.
[Closed]
[Closed]
[Closed]
[Open ]
[Closed]
[Closed]
[Closed]
[Closed]
[Closed]
[Closed]
[Closed]
[Open ]
[Closed]
[Closed]
[Closed]
[Closed]
[Closed]
[Open ]
[Closed]
466
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0