20 en | Installation
11.2
Connecting the HTS50
NOTE! There should be a 230 V AC/50 Hz power outlet and a
i
TAE telephone socket (NFN, NF or NFF) near to the position
where the HTS50 is installed.
1.
2.
ISA-50-MS V2 I 2008.02
Insert the plug on the mains power adapter supplied into
the socket on the HTS50. To prevent strain on the cord,
feed it through the cable channel and then through the
opening on the back of the unit.
Insert the plug on the telephone cord into the socket on
the HTS50. To prevent strain on the cord, feed it through
the cable channel and then through the opening on the
back of the unit.
User Manual
Carephone 50
Bosch Security Systems