Table of Contents
Advertisement
18 en | Installation
11
Installation
CAUTION!
!
Before starting to install and program the HTS50, read through
the user manual carefully as it contains important information.
–
–
–
–
–
–
11.1
Placing the HTS50
The HTS50 can be set up either on a level surface or mounted
on the wall.
Setting up
The HTS50 is designed for use in the home environment. Many
items of furniture are coated with a wide variety of paints,
varnishes and plastics, and are treated with different types of
care product. The feet of the HTS50 may leave marks on
furniture surfaces as a result of chemical processes. To avoid
this, place the unit on a non-slip surface.
Wall mounting
You can mount the HTS50 on the wall either using a wall
bracket that can be ordered as a special accessory, or you can
fix the unit directly to the wall without a bracket. The wall
bracket stabilises the HTS and makes installation easier.
ISA-50-MS V2 I 2008.02
Only connect the HTS50 to a professionally installed 230 V
AC/50 Hz power outlet.
Use only the original line power adapter. Any other power
adapter could damage your unit.
Do not install in a wet or humid environment.
Do not install on a soft surface as this may impair the voice
quality of the HTS.
Do not install in the proximity of TV sets, large metal
objects, microwave appliances or radio telephones. This
will impair the reception of signals from the RF transmitter.
Take care not to obstruct the microphone mounted on the
right-hand side of the unit.
User Manual
Carephone 50
Bosch Security Systems
Advertisement
Table of Contents
