System expansions
Removing a hard disk drive
► Open the casing (see
Harddisk drive,
► Remove all connected cables (data cable, power supply) from the drive.
► Slightly press together the EasyChange rails which are mounted on the hard disk drive (1) and
pull the hard disk drive out of the installation slot in the direction of the arrow (2).
► Pull the EasyChange rails off the hard disk drive.
► Close the casing (see
50
"Opening the casing", Page
1
"Closing the casing", Page
33).
2
1
35).
AMILO Desktop Operating Manual, edition 3