Phone Number
Specifies the number to be dialed when the corresponding Quick Dialing number is used.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
2.8.9 [2-6-2] Numbering Plan—Quick Dial
Programming Manual References
None
Feature Manual References
1.14.1 Quick Dialing
1.13.23 Private Network Features—VoIP (Voice over Internet Protocol)
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
Feature numbers used to access various PBX features can be programmed. The following features
are available while hearing a busy, DND, or ringback tone. Each feature must have a unique feature
number.
For more information on flexible numbering, see "1.6.4 Flexible Numbering/Fixed Numbering" in the
Feature Manual.
BSS / OHCA / Whisper OHCA / DND Override
Specifies the feature number used to notify a busy extension of a second call by Call Waiting, or call
an extension in DND mode.
Default
1
Value Range
1 digit (0–9, *, or #)
Maintenance Console Location
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—Manual C. Waiting for Extension
Call
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 2—Manual C. Waiting for Extension
Call
2.8 [2] System
PC Programming Manual
283