Panasonic KX-TDA50 Programming Manual page 100

2.7 [1] Configuration
1.19.3 Voice Mail (VM) Group
DPT Type—Location No. (for DPT or S-Hybrid port)
Specifies the location number of the connected DSS Console or PC Console.
Note that, depending on system traffic, there may be a limit to the number of PC Consoles that can
be supported by a single DLC/DHLC card.
When changing the location number of a DSS Console for which one or more SDN buttons are set,
all SDN buttons customized for that device will be deleted. When you attempt to apply the new
settings, a warning message is displayed showing the slot and port number for which SDN buttons
will be deleted. If you do not wish to delete SDN buttons for this port, click Cancel.
Default
1
Value Range
For KX-TDA50:
Location number for DSS Console: 1–4
Location number for PC Console: 1, 2
For KX-TDA100/KX-TDA200:
1–8
For KX-TDA600:
Location number for DSS Console: 1–64
Location number for PC Console: 1–8
Maintenance Console Location
2.7.5 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
1.3.21 CTI (Computer Telephony Integration)
1.13.5 PC Console/PC Phone
DPT Type—VM Unit No. (for DPT or S-Hybrid port)
Selects the unit number of the connected VPS.
Default
1
Value Range
For KX-TDA50:
1
For KX-TDA100/KX-TDA200:
1, 2
100 PC Programming Manual