Introduction to DBS 576 Programming
Initial Settings (Manual)
Introduction
1. Perform the following programming settings. These settings are the minimum
0
System
Configuration
FF1
System
FF2
Trunks
2. Press ON/OFF to exit Programming Mode.
3. On the CPC card, press RESET (and release
FF3
Extensions
4. Wait for the system to power itself off, then
FF4
FF-/Soft Keys
* Eventually, most cards will be automatically
detected when they are installed.
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page Intro-6
required to make the system work:
•
System Size (see pg. 0-6)
00 Hold (1-6) Hold
•
Free Slot Assignment* (see pg. 0-7)
01 (1-6) (01-12) Hold (1-99) Hold
•
Option Slot Assignment* (see pg. 0-8)
02 (1-6) (13 or 14) Hold (50 or 61) Hold
•
System Date/Time (optional; see pg. 8-42)
FF8 1 000 Hold (yymmdd) Hold (hhmm) Hold (1=Monday, 2=Tuesday, ...
7=Sunday) Hold
quickly).
back on. All display phones should read:
0:00 Wed JAN 1
Ext
•
DBS 576 (USA) issued January 1999
Section 400: Programming
The CPC-288 Card
(front edge, facing out from cabinet)
CN3
(for PC Upgrade Kit)
RUN LED (FPU)
RUN LED (MPU)
MJ LED
MN LED
RAM HOLD switch
RESET button
CODE rotary switch
MODE button
MOH plug-in
576-20-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B