Table of Contents
Advertisement
DIVAR IP 7000 1U
10
Appendices
This chapter gives information for supporting and troubleshooting.
10.1
Motherboard
All graphics shown in this chapter were based upon the latest PCB Revision available at the
time of publishing of the manual. The motherboard you've received can differ from the
graphics shown in this chapter.
10.1.1
Motherboard layout
Figure 10.1: Motherboard layout
Important notes to the user:
–
–
–
–
Bosch Sicherheitssysteme GmbH
Jumpers not indicated are for testing only.
When LE2 (Onboard Power LED Indicator) is on, system power is on. Unplug the power
cable before installing or removing any components.
All systems have a SATA DOM connected to Serial ATA ports (I-SATA-5) with a small
power connector (DOM PWR).
SATA-DOM: Is plugged in connector I-SATA-5 on the motherboard.
Installation Manual
Appendices | en
31
2014.12 | V3 | DOC
Advertisement
Table of Contents
