Adding And Formatting The Vhd As A Vrm Target - Bosch DIVAR IP 7000 1U Installation Manual

26 en | Installing additional drives
5.
6.
7.
8.
6.3

Adding and formatting the VHD as a VRM target

To add and format the VHD as a VRM target:
1.
2.
3.
4.
5.
6.
2014.12 | V3 | DOC
In the File dialog box, enter the path to the new virtual hard disks using the assigned
drive letter of your newly installed drisks, then click Next.
Note: The name you are creating must have the file extension *.VHD, for example F:
\VirtualDisk.vhd.
In the Size dialog box, enter the size of the new virtual hard disks in the Size of virtual
disk (MB) box, then click Next.
Note:
– If the total size of the new disk is displayed in gigabyte, multiply the value in the
Currently available free space size by 1024.
– If the total size of the new disk is displayed in terabyte, multiply the value in the
Currently available free space by 1024 twice.
In the Description dialog box, enter the description of the new virtual disk, then click
Next.
In the Summary dialog box, click Finish.
In the right pane of the Server Manager window the new virtual disks are displayed.
On the Bosch VMS default screen, double-click the Configuration Client icon
change device network settings. The application starts.
Enter the following, then click OK.
User name: admin
Password: no password required (if not set with the wizard)
Connection: 127.0.0.1
In the Device Tree, expand VRM Devices, expand the VRM of the system, expand the
configured Pool, expand the iSCSI of the system, then click the icon of the iSCSI target.
The virtual disks are displayed with the state unformatted.
Select the Format check box.
Click the Format LUN tab, then click OK to format the selected LUNs.
The formatting progress starts and when completed, the new disks will be displayed with
the state formatted.
Close Configuration Client.
Installation Manual
DIVAR IP 7000 1U
to
Bosch Sicherheitssysteme GmbH