LG GDK-186 User Manual page 62

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide
KeyLock (Key Lock Function)
Press MENU(UP( ) or DOWN( ) button.
Main Menu is displayed on the LCD.
(or set ' > ' mark to '2 KeyLock' by pressing UP( ) button or DOWN( ) button and
Press
press OK button).
Confirmation tone will be heard and displayed "KEY LOCK" and key lock icon.
(The initial state is disable)
When key lock mode is set, "KEY LOCK" is displayed on the LCD and Key Lock Icon is displayed.
In key lock mode, all keys can't be entered except for key-unlock procedure (MENU +
SelFP (Select FP)
The wireless terminal, GDC-345H(GAP), can be subscribed to up to 4 GAP systems. However, the
wireless terminal can't use all systems at the same time. Only one system selected by a user is
available for using the wireless terminal. This function is to select system that a user wants to use.
Please refer to '6.6 Change of Subscribed System' for details.
Call Log (Caller ID)
When incoming call arrived, handset stores the caller ID. User can check the caller ID in call log
menu.
Review caller ID and dialing form caller ID
Press MENU(UP( ) or DOWN( ) button.
Main Menu is displayed on the LCD.
Press
and press OK button).
Check new messages and all received messages. The number of new means receive
number after last checking.
Press OK button and check recent received message.
(Displaying the name of caller doesn't support.)
Phone number is displayed on LCD and then searched using UP or DOWN button.
(When over 20 messages, the oldest data is updated)
Press OK button and then detailed information of received number is displayed.
(If same messages are received, only received the number of times are displayed)
If you want to make a call using this number, press
Notice
This feature is supported on LDK-130/300 (MPB version 1.0Ba above and WTIB version 1.0G above)
and GDK-20W (MPB version 3.0Aa above). In LDK-24 system, this feature is available without version.
GDK-186/100/34E doesn't support this feature. LDK-130/300/600 supports this feature with both
external and internal call, but GDK-20W supports this feature with external call only.
(or set ' > ' mark to '4 Call Log' by pressing UP( ) button or DOWN( ) button
button during display.
５６
)