6
Installing and Replacing Other Components
8. Tighten the retaining screws that hold the chassis tray assembly.
Replacing or Upgrading Memory
The 105s gateways have two dual inline memory-module (DIMM) sockets.
This section explains how to upgrade or replace the memory in your gateway
by using a Nokia-approved memory upgrade kit.
The 105s comes with different memory configurations. Contact Nokia
customer support for more information on the supported memory
configurations.
Note
Nokia recommends that you obtain memory kits only from Nokia or
authorized resellers. For further information, contact the appropriate
Nokia customer support site listed
The DIMM sockets are located at the right of the motherboard, as you look at
the gateway from the front, as
76
Chassis tray assembly retaining screws
"Nokia Contact Information"
Figure 18
shows.
Nokia 105s Gateway Installation Guide
00525gen
on page 3.