5
Connecting PMC Network
Interface Cards
This chapter describes the PMC network interface cards (NICs) available for
the 105s gateway and describes how to connect those NICs to your network.
The following NICs are covered:
For instructions on adding or replacing interface cards, see
"Installing and Replacing Network Interface Cards."
Caution
Protect your 105s gateway and other electronic equipment from
electrostatic discharge (ESD) damage by making sure you are
properly grounded before you touch any electronic component.
Four-Port 10/100 Mbps Ethernet NICs
The 105s gateway supports Nokia-approved, four-port UTP5 dual-mode
10-Mbps and 100-Mbps Ethernet NICs.
Nokia 105s Gateway Installation Guide
Four-Port 10/100 Mbps Ethernet NICs
Two-Port Copper Gigabit Ethernet Network Interface Card
Two-Port Fiber-Optic Gigabit Ethernet Network Interface Card
Chapter 4,
59