XG Series User's Guide
5.15.8.23 serverinfo ssh filter move
Function
Available Model
Syntax
Options
Use Mode
Explanation
5.15.8.24 serverinfo ssh filter default
Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Change the priority of the application filter for the SSH server function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
serverinfo ssh filter move <count> <new_count>
<count>
• Target filtering definition number
Specify a filtering definition number of which the priority is to be changed.
<new_count>
• Destination filtering definition number
Specify a new priority for <count> with a decimal value from 0 to 29.
If any definition with the same definition number exists, it will be inserted before the
existing one.
Configuration mode (admin class)
Set the priority of the application filter for the SSH server function.
Set the default operation of the application filter for the SSH server function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
serverinfo ssh filter default <action>
<action>
Specify how to handle a packet that did not match any application filter table for the SSH
server function.
• accept
Transmit the relevant packet.
• reject
Block the relevant packet.
Configuration mode (admin class)
Set how to handle a packet that did not match any application filter table for the SSH
server function.
A packet that did not match any application filter table is transmitted.
serverinfo ssh filter default accept
319
Chapter 5 Command Reference
Device Information Settings