Chapter 4 Configuration Settings for RAID Groups or Thin Provisioning
4.4 When Using Thin Provisioning Volumes (TPVs)
4.4.3
Create Volume
This function creates new TPVs.
Detailed information on creating TPV type volumes is provided below.
•
Volumes are created in TPP.
•
There are two methods to select a TPP; "Automatic" and "Manual".
•
The Thin Provisioning function must be enabled. Refer to
details.
•
The total TPV capacity that can be created in the ETERNUS DX depends on the maximum pool capacity
specified in
maximum pool capacity for each model" (page 56)
■
Automatically selecting destinations to create volumes
The procedure to create TPVs by selecting destinations automatically is as follows:
Procedure
1
Click [Create] in [Action].
The [Create Volume] screen appears.
2
Select "Automatic" for "RAID Group/TPP Selection".
"4.4.1 Set Thin Provisioning" (page
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
"4.4.1 Set Thin Provisioning" (page 55)
55). Refer to
"The maximum number of pools and
for details.
63
for
P2X0-1250-06ENZ0