Chapter 4 Configuration Settings for RAID Groups or Thin Provisioning
4.4 When Using Thin Provisioning Volumes (TPVs)
5
Click the [OK] button.
The screen returns to the previous screen. The created RAID group is displayed in the RAID group list.
6
When creating multiple RAID groups that configure a TPP, repeat
•
Specify the threshold so that "Warning" is the same or larger than "Attention".
•
The "Attention" threshold can be omitted. When setting the "Attention" threshold, specify a
threshold while the checkbox is selected.
7
After creating a RAID group that configures the TPP, click the [Create] button.
A confirmation screen appears.
8
Click the [OK] button.
Create Thin Provisioning Pool starts.
9
Click the [Done] button to return to the [Thin Provisioning Pool] screen.
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
62
Step 3
through
Step
5.
End of procedure
P2X0-1250-06ENZ0