Table of Contents
Advertisement
26
en | Monitoring and Maintenance
8
Monitoring and Maintenance
NOTICE!
You can find more detailed documentation on www.boschsecurity.com under Product
Catalog > CCTV > Digital Recording and Storage > Disk Arrays (Network Attached).
8.1
Monitoring the System
8.1.1
Using the FilerView Monitor
The system should be monitored. An overall system status monitor is provided by the
FilerView administration interface.
1.
2.
3.
8.1.2
Logs and Reports
1.
2.
3.
4.
5.
- | V2 | 2009.11
Connect to the FilerView interface as described in Section 6 Configuration through the
Web Interface, page 11.
In the navigation panel, select Real Time Status > Health Monitor.
The overall Health Monitor opens in a new browser window.
Keep this window open and check the status regularly.
In the navigation panel, select Real Time Status > Filer At-A-Glance.
Data traffic, CPU load etc. are visualized here.
Connect to the FilerView interface as described in Section 6 Configuration through the
Web Interface, page 11.
In the navigation panel, select Filer > Report.
A general report on the system displays.
In the navigation panel, select Filer > Syslog Messages.
The log file for all system messages displays.
In the navigation panel, select Network > Report.
Information on the network displays.
In the navigation panel, select LUNs > iSCSI > Report.
The iSCSI status and further information displays.
Installation Guide
DSDA Digital Storage Disk Arrays
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
