Attaching The Lightshield; Weight Of A Lightshield Matching Existing Furniture - Miele DA 3360 Operating Instructions Manual

Installation
^ Remove the protective film between
the deflector plate and the casing.
^ Secure the front of the appliance to
the floor of the housing unit from
below using 4 screws.
To avoid damaging the deflector plate
when it is pulled out, care should be
taken to screw the fixing screws in
straight, and to ensure that the
screwheads are countersunk.
^ Secure the spacer strip to the back of
the appliance from behind using
4 plastic rivets as shown.
26

Attaching the lightshield

^ Attach the lightshield (if using).
A DML 400 installation kit, available as
an optional accessory, is required for
this.
Follow the installation instructions
supplied.
Weight of a lightshield matching
existing furniture
The lightshield must not exceed 1300 g
in weight.
This applies to lightshields with a depth
of up to 30 mm.
For larger or heavier lightshields, the
weight must be reduced by e.g.
machining it away at the back.