Service - Panasonic AG-CPD20P Operating Instructions Manual

Administrator Setup

Service

AG-CPD20 Operating Time
Use this function to view the operating time of the recorder.
(unit: hours)
FAN Operating Time
Use this function to view the operating time of the fan.
(unit: hours)
CAM1 Operating Time
Use this function to view the operating time of the Camera
connected to the [CAMERA 1] connector.
(unit: hours)
AG-RCP30 Operating Time
Use this function to view the operating time of the Remote
Control Panel.
(unit: hours)
LCD Lighting Time
Use this function to view the cumulative lighting time of the
LCD panel.
(unit: hours)
AG-CPD20 Version
Use this function to view the version of the recorder.
Serial No.
Use this function to view the serial number of the recorder.
Microcontroller Version
Use this function to view the version of the microprocessor.
AG-RCP30 Version
Use this function to view the version of the Remote Control
Panel.
*
1 Version upgrade cannot be performed when the following
conditions exist in the root directory.
• If a DATA folder is present
• If multiple version upgrade files (.VUP extension) are present
(continued)
Operations
Software Version Up
For details on obtaining version upgrade files, consult your
supplier. Make sure to use a computer beforehand to save
the version upgrade file you obtain in the root directory
an SDHC Memory Card or USB memory device.
1. Insert the SDHC Memory Card or connect the
USB memory device to the recorder.
2. Select [Service] - [Operations] - [Software
Version Up], and press the [
confirm the entry.
A confirmation dialog box appears.
3. Select [OK], and accept by pressing the [
button.
The version upgrade is performed, and the recorder
automatically restarts.
Notes:
• Do not make button operations or turn the power off during
a version upgrade.
• An error screen appears if the version upgrade fails. (See
"Error Message" on pages 111-116.)
94
*
of
1
] button to
]