Allocating A Coffee Type; Selecting The Allocation Of Types Of Coffee; Selecting A Type Of Coffee; Allocating A Type Of Coffee - Miele Built-in coffee machine Operating And Installation Instructions

Allocating a coffee type

There are 16 different types of
Nespresso coffee available for use in
this machine (as well as occasional
"special" blends). You can choose from
espresso flavours from different origins
or from a single origin, coffee types for
larger cups or decaffeinated coffee
flavours.
You can store five different types of
coffee in this machine.
The capsule carousel has five
chambers that are numbered 1 to 5.
The chambers have been allocated
with five types of Nespresso coffee at
the factory.
Selecting the allocation of
types of coffee
^ Touch X.
^ Use the arrow sensors to highlight
"Type allocation". Touch the OK
sensor.
^ Use the arrow sensors to highlight
the required chamber. Then touch
the OK sensor.
For this chamber, you can now
– Select type from the types of coffee
that have already been allocated.
– Allocate type if you want to enter a
new type of coffee.
If you have already allocated types of
coffee yourself, you can
– select Change type to change the
name of the type of coffee, and
– select Delete type if you want to
completely delete a type of coffee.
30

Selecting a type of coffee

^ Use the arrow sensors to highlight
"Select type". Then touch the OK
sensor.
The tick ( indicates which type of
coffee is currently allocated for the
chamber.
^ Use the arrow sensors to highlight
the required type of coffee. Then
touch the OK sensor.
The setting is now saved.

Allocating a type of coffee

^ Use the arrow sensors to highlight
"Allocate type". Then touch the OK
sensor.
Letters will appear in the display that
you can select with the arrow sensors.
You can use the arrow sensors to select
from numbers, upper case and lower
case letters.
^ Use the arrow sensors to select the
required character. Then touch the
OK sensor.
The character will then appear in the
line above.
^ Repeat the process until the required
type name appears in the display line
above.
Tip: Touch # to delete the last
selected character.