Preface
This publication will provide the service technician with
information for troubleshooting, testing, and repair of
major systems and components on the Groundsmaster
345, 322-D and 325-D
(Model 30788 and 30795)
REFER TO THE TRACTION UNIT AND CUTTING
UNIT OPERATOR'S MANUALS FOR OPERATION,
MAINTENANCE AND ADJUSTMENT INSTRUC-
TIONS. Space is provided in Chapter 2 of this book to
insert the Operator's Manuals and Parts Catalogs for
your machine. Replacement Operator's Manuals are
available by sending complete Model and Serial Num
ber of traction unit and cutting unit to:
The Toro Company
8111 Lyndale Avenue South
Minneapolis, MN 55420
The Toro Company reserves the right to change product
specifications or this publication without notice.
© The Toro Company - 1992, 1996, 1998, 2001, 2003, 2004, 2005, 2007
Groundsmaster
Groundsmaster 328-D
Use this book along with the Toro Operator's Manual and Parts Catalog for the specific model and serial
number of the machine, and the Kubota 05 Series Workshop Manual
.
This safety symbol means DANGER, WARN-
ING, or CAUTION, PERSONAL SAFETY IN-
STRUCTION. When you see this symbol,
carefully read the instructions that follow.
Failure to obey the instructions may result in
personal injury.
NOTE: A NOTE will give general information about the
correct operation, maintenance, service, testing or re
pair of the machine.
IMPORTANT: The IMPORTANT notice will give im-
portant instructions which must be followed to pre-
vent damage to systems or components on the
machine.
Part No. 92801SL, Rev. I
Service Manual
300 Series
®
.