Table of Contents
Advertisement
Key Phone Features
Answering a Call
When the phone rings or vibrates, press [Send]. If the
earbud provided is attached to a
receive an incoming call by pressing the button on the
earbud when the ring sounds.
When an incoming CO ring is heard and a message
from
TeleniumIP
LCD, press [Send] to connect.
CONDITIONS
» When audible signals are heard, call information is
displayed and the Ring LED will flash.
» Caller Groups can be distinguished with a different
ring type.
» Press the Volume [Up/Down] button on the side
during a conversation to control the volume level.
» When the conversation is over, press the [End] button.
The phone icon disappears and the call is terminated.
» Even though the earbud is attached, incoming call
ring tone is heard through the speaker, not through
the earbud.
Nomad IP User Guide
DRAFT
/
XTS-IP
/
The button on the earbud provided, works
as a Send button and can hang up the call.
DRAFT
Nomad
XTSc-IP
is displayed on the
IP, you can also
Month 2006
21
Advertisement
Table of Contents
