Table of Contents
Advertisement
13 Configuring the network settings [Network]
13.2 Configure the HTTPS settings
Click the [Network] tab on the "Network" page. (section 6)
The settings relating to the HTTPS protocol that can enhance the network security by encrypting the access
to units on this page.
The HTTPS settings will be configured according to the following procedure:
Generation of the CRT key (SSL encryption key)
When using the self-signed certificate
When using the server certificate
Generation of the self-signed certificate
Generation of CSR (Certificate Signing Request
Application for the approval by CA (Certificate
Authority) – issue of the server certificate
Installation of the server certificate
Configuration of the connection protocol
Access to the units using the HTTPS protocol
Operating Instructions
63
Advertisement
Table of Contents
