Connecting To A Tv; Connecting To A Satellite Tuner Or Cable Tuner; Dvr-5070 (En - Kenwood DVR-5070 Operation Manual

Connecting to a TV

TV
Audio cord
COMPONENT Video cord
COMPOSITE Video cord (accessory)
S-Video cord
COMPONENT connection corresponds only to some areas.
When the TV has a COMPONENT terminal, the DVD image will be played
Note Note
back with higher picture quality in case of COMPONENT connection.
Connect the S-video or the COMPOSITE video cable also in this case.

Connecting to a Satellite Tuner or Cable Tuner

Connect the OPTICAL or the COAXIAL cable, depending on the digital output of the satellite tuner.
Depending on the input switching, the output from the MONITOR OUT terminal will be one of
the following signals. Please note that a different signal type will not be put out.
S-VIDEO terminal : S-video signal connected to the (S-VIDEO) VCR IN, the (S-VIDEO) SAT IN, or
the AV AUX S terminal.
VIDEO terminal : Composite video signal connected to the (VIDEO) VCR IN, the (VIDEO) SAT
IN, or the AV AUX VIDEO terminal.
Remove protective cap
before connecting.
Audio cord
Satellite tuner or Cable tuner
OPTICAL or COAXIAL cable
S-video cord
System Connections

DVR-5070 (EN)

COMPOSITE
video cord
13