System Connections; Back Of The Receiver - Kenwood DVR-5070 Operation Manual

System Connections

10
When connecting the related system components, refer also
to the instruction manuals of the related components.
Caution:
Do not plug in the power lead until all connections are completed.
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or
fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including pro-
jection) equal or greater than, shown below.
Top panel : 50 cm

Back of the Receiver

1
1 SPEAKER terminals
2 AUDIO input/output terminals
SAT/CABLE IN (SATELLITE or CABLE input) terminals
VCR IN/OUT terminals
Analog recording of DTS-encoded discs is not
possible.
TV IN terminals
3 DVD COMPONENT VIDEO OUT terminals
4 SUBWOOFER PRE OUT terminal
5 VIDEO (Composit) / S-VIDEO input/output terminals
VCR IN/OUT terminals
SAT/CABLE IN (SATELLITE or CABLE input) terminals
MON. OUT (MONITOR output) terminals
Side panel : 10 cm Back panel : 10 cm
9 8 7
2
Caution : Read this page carefully to ensure
3 4 5
6 AC cable
7 DIGITAL IN terminals
OPTICAL input terminals
SAT/CABLE (SATELLITE or CABLE) terminal
VCR terminal
COAXIAL input terminals
SAT/CABLE (SATELLITE or CABLE) terminal
VCR terminal
8 DIGITAL OUT OPTICAL terminal
Digital out signal is PCM format. Use for digital recording
with an MD recorder or a CD recorder
9 Antenna terminals
safe operation.
Malfunction of microcomputer
If operation is not possible or erroneous
display appears even though all connec-
tions have been made properly, reset the
microcomputer referring to "In case of
difficulty".
DVR-5070 (EN)
T
6