Room Status Control - Panasonic KX-NCP500 Manual Manual

15.1.3 Room Status Control

[Programming Example of Ring Tone Pattern Table]
Intercom
Table
Call/Hold
No.
Recall
1 Double
2 Single
: :
Conditions
•
"PT Ring Off Setting" can be enabled or disabled through system programming. If disabled, PT users
cannot turn incoming call ringing off for their extension.
•
For the S-CO, G-CO, L-CO, ICD Group, INTERCOM, PDN and SDN buttons, one of 30 ring tones can be
assigned through personal programming.
PC Programming Manual References
4.15 [2-8-1] Ring Tone Patterns—Call from CO—
4.16 [2-8-2] Ring Tone Patterns—Call from Doorphone—
4.17 [2-8-3] Ring Tone Patterns—Call from Others—
4.18 [2-9] System Options—Option 1—
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 1— Ring Pattern Table
→Option 6— ICM Tone
6.5 [4-1-4] Wired Extension—Flexible Button—
CO, Single CO, Group CO, G-DN, SDN)
6.10 [4-2-1] Portable Station—Extension Settings—Option 1—
6.17 [4-3] DSS Console—
CO, G-DN, SDN)
Feature Manual References
21.1 Capacity of System Resources
Operating Manual References
3.1.4 Customizing the Buttons
15.1.3 Room Status Control
Description
A proprietary telephone (PT) with a 6-line display designated as the hotel operator extension can be used to
view and set the Check-in/Check-out/Cleaned-up (Ready or Not Ready) status of guest rooms associated with
extensions.
Any wired extension can be used as a room extension without special programming.
Flexible buttons on the hotel operator's extension can be set as Room Status Control buttons. The three types
of Room Status Control buttons are as follows:
276 Feature Manual
CO Line Call/ Doorphone
Hold Recall Call
TRG1 ... Port 1
Single Single
Double Double
: : :
PT Operation—PT Ring Off Setting
Optional Parameter (Ringing Tone Type Number) (for Loop
Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO, Group
Timed
Call Back
Reminder
...
: :
Ring Tone Pattern Plan 1–8
Ring Tone Pattern Plan 1–8
Extension—Ring Tone Pattern Plan 1–8
Ring Pattern Table
External
LCS
Sensor
: : :
Document Version 2009-12