Password Security - Panasonic KX-NCP500 Manual Manual

13.1.3 Password Security

a.
OHCA: A call waiting tone will be heard even if the OHCA feature is set.
b.
USB Module/Bluetooth Module: The DPTs will not function properly if a USB Module or Bluetooth
Module is attached to either DPT. Do not connect a USB Module or Bluetooth Module to either of the
DPTs.
Note
To cancel a Digital XDP connection, disconnect the slave DPT from the master, then disconnect the and
reconnect the master DPT to the PBX.
[DPT + DPT + SLT]
•
When an SLT is connected to the slave DPT in parallel mode, the SLT acts as a parallel extension of the
master DPT. If connected in XDP mode, the SLT acts as an independent extension.
Installation Manual References
1.3.3 System Capacity
3.8.2 Parallel Connection of the Extensions
3.8.3 Digital EXtra Device Port (Digital XDP) Connection
PC Programming Manual References
3.24 [1-1] Slot—Port Property - Extension Port
→ XDP Mode
→ Parallel Telephone Ringing
4.9 [2-6-1] Numbering Plan—Main—Features—
PT Programming Manual References
[600] EXtra Device Port (XDP) Mode
Operating Manual References
1.3.48 Paralleled Telephone
13.1.3 Password Security
Description
To maintain system security, system passwords are required to access certain programming functions of the
PBX. By giving different users access to different passwords, it is possible to control the amount of
programming that each user is able to perform.
The following types of system passwords are available:
Password
PT System Password
(PT) for User
System Password
(PT) for
Administrator
200 Feature Manual
Parallel Telephone (Ring) Mode Set / Cancel
Description
Used to access user-level PT programming. The specific
PT programming items that may be programmed at user
level can be selected through system programming item.
Used to access administrator-level PT programming. All PT
programming settings are available.
Format
4 – 10
digits
Document Version 2009-12