Set Extension Names - Panasonic DBS576 Section 700 Technical Manual

Chapter 4. User Maintenance
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note: Press the FLASH key to clear the entire entry.
12. Press the HOLD key to store the entry.
13. To set additional SSD index names, press the volume up or
down key or press the HOLD key to move to the desired
SSD.
14. Repeat steps 9-13 until all SSD indexes are entered.
15. Press the AUTO key to exit the entry mode.
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A

Set Extension Names

Description
You can assign names to each extension, even if the extension is not a display telephone. When the
extension is called, the name appears on the display. For more information on the digital key
telephone display, see "Display Information" on page 157.
Operation
To set extension names using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 03.
3. Press the HOLD key.
90
Action
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
Next SSD index number displays
Desired SSD index number displays
Enter SSD # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8103-
Extension Name displays
576-20-700