Panasonic DBS576 Section 700 Technical Manual page 210

Chapter 5. Key Telephone Features
Each extension may have customized soft key features available. The customization must be
programmed by the dealer.
To access the feature beside the soft key, simply press the associated soft key.
Operation
To enable Variable Mode:
1. Press the ON/OFF key.
2. Press the Variable Mode FF key
3. Press the ON/OFF key.
To Execute a Variable Mode Function:
1. Press the NEXT or PREV keys on the large display tele-
phone or the up or down arrow keys on the small display
telephones until the desired function appears
2. Press the soft key next to the desired function
To cancel Variable Mode:
1. Press the ON/OFF key.
2. Press the Variable Mode FF key.
3. Press the ON/OFF key again.
To assign Variable Mode Functions to a Small Display Telephone
1. Press the ON/OFF key.
2. Press PROG + 95 + (XX) + Fixed Feature Code (see
Table 18 on page 166).
OR...
Press PROG + 95 + (XX) + REDIAL + Flexible Feature
Code (see Table 18 on page 166).
Note: Where XX is the Flexible Screen position as listed
below.
3. Press the ON/OFF key.
210
Action
Action
Action
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
AUTO FNC Mode displays
Programmed features display
Result
The variable mode function executes
Result
AUTO FNC Mode displays
Result
The variable mode function executes
576-20-700