Table of Contents
Advertisement
Settings (Step 2 Network Settings)
2-4 Other Settings Using the "VN-C625U Setup Tool" (3. Alarm Setting)
This section describes procedures for alarm setting.
Alarm Input
• When there is an input of signals to the alarm input terminal on the ceiling mount.
☞
(
Page 16 "Alarm Input Terminal")
• When motion is detected. (
• Upon movement to a new position.
• When there is a change in the Black & White mode.
Operation when an alarm input is activated
• Output signals are sent from the alarm output terminal on the ceiling mount.
☞
(
Page 17 "Alarm Output Terminal")
• Alarm packets are sent to the PC. (
• The camera shifts in position.
• Black & White mode changes.
• Images are uploaded to the FTP server. (
• Quits all operations. (
1.
Start up the "VN-C625U Setup Tool" and select [Alarm].
36
☞
Page 46 "Motion Detection Setting")
☞
Page 39 "Message Packet")
☞
☞
Page 39 "Shutdown")
Page 50 "FTP Client Setting").
1
2
3
4
Advertisement
Table of Contents
