JVC LST0728-001C Instructions Manual page 78

Applications
Main Menu List (continued)
Unit Setting 1 (continued)
Item
C
Error Report
● Select check box
Dialog
● Select check box
Mail
D
Record Control
● Select check box
ON at startup
E
Mail Server
SMTP Server
● 25
Port Number
User ID
Password
POP Server
● 110
Port Number
User ID
Password
● NONE
SMTP
Authentication
Send Test Mail
F
Emergency Record
Time of Record
● 60seconds
70
Preset Values
Enables you to select how you want to be notified when an error is
detected in the system.
Select [Dialog] to display a warning dialog on the screen.
Do not select
check box
Select [Mail] to receive an e-mail notification on any abnormality at
the preset e-mail address.
Do not select
check box
Memo :
● For details on errors, refer to the actions to take when the
[WARNING] indicator lights up. (A Page 156)
Select this check box to turn on the recording control mode when
the system starts up.
Do not select
check box
^ Enables you to configure the necessary information on the mail
server to be used if you have selected AMailB in the [Error Report]
item C.
Setting for the outgoing mail server.
^
^
Setting for the incoming mail server.
^
^
Enables you to select the method of user authentication when
sending out a mail. For queries on the settings, consult your system
Authentication
administrator.
POP before SMTP
Click to send out a test mail to the address specified in the [Mail
Send List] item I.
NONE Select the duration of emergency recording, which starts recording
of all channels when a signal is input to the [EMERGENCY]
30seconds
terminal on the rear panel.
Select AContinueB to continue recording until it is stopped manually
5minutes
on the front panel.
10minutes
20minutes
Continue
Description
Reference
Page
^
A Page 156
^
^
^
A Page 52