Epson Stylus Pro 3800 Service Manual page 205

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4.4.1.5 SHAFT, RELEASE, ASSY.
1. Remove the HOUSING, UPPER.
2. Remove the ASF, ASSY. (p197)
3. Remove the MOTOR, RELEASE, ASSY.
4. Remove the four screws that secure the SHAFT, RELEASE, ASSY.
4-159.
Four C.B.S. 3 x 6 screws (9 ± 1 kgf.cm)
5. Lift up the SHAFT, RELEASE, ASSY. while pushing down the three tabs on the
SHAFT, RELEASE ASSY. See Figure 4-160.
6. Slide the SHAFT, RELEASE, ASSY. leftward to release the SHAFT, RELEASE,
PAPER GUIDE, UPPER from the main frame, and then remove the SHAFT,
RELEASE, ASSY. See Figure 4-160.
DISASSEMBLY & ASSEMBLY
(p107)
(p187)
See Figure
Disassembly/Assembly Procedure (Group 2)
Rear side of the printer
C.B.S. 3x6
Figure 4-159. Removing the screws from the SHAFT, RELEASE, ASSY.
Rear side of
the printer
tabs
SHAFT, RELEASE, ASSY.
Figure 4-160. Removing the SHAFT, RELEASE, ASSY.
Revision C
SHAFT, RELEASE, ASSY.
SHAFT, RELEASE, PAPER
GUIDE, UPPER
205