Start Here Start Here Epson Stylus Unpack Make sure you have these items: Printer Ink cartridges The printer weighs about 43 pounds (20 kilograms) and should be lifted and moved Warning: by two people. Do not open ink cartridge packages until you are ready to install the ink. Cartridges are Note: vacuum packed to maintain reliability.
Turn On the Printer Connect the power cable. (Do not connect the printer cable yet.) Press the Power button. After a minute, the ink cover is automatically released. Install Ink Cartridges Lift the ink cover. If the ink cover is locked, press the Note: cover open button on the control panel to release it.
Page 3
Macintosh Make sure your Macintosh and printer are turned on. Connect the USB cable. Insert the Epson Stylus Pro 3800 printer CD. If necessary, double-click the Epson CD-ROM desktop icon. Double-click the Epson icon.
If you see a Found New Hardware Wizard screen, click Cancel and disconnect the Note: USB cable. You can’t install your software that way. Insert the Epson Stylus Pro 3800 printer CD. Double-click Stylus Pro 3800 Driver for USB. When you see the license agreement, click Accept.
Page 5
Use both hands to pull out and extend the output tray, lifting it slightly as you pull. Make sure the arrow marks on the tray and inside the printer are aligned. Pull out the extensions as necessary for your paper size. Squeeze the left edge guide and slide it to the left.
Epson ink and paper online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Epson and Epson Stylus are registered trademarks and Exceed Your Vision is a trademark of Seiko Epson Corporation. Epson Preferred is a service mark of Epson America, Inc.