Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
1.5.1 Menu Mode Settings
Top Menu
Menu Item
PLATEN GAP
PRINTER SETUP
PAGE LINE
PRODUCT DESCRIPTION
Table 1-8. Menu Mode Settings List
Settings
(shaded one is the default)
NARROW
STANDARD
Sets the platen gap (gap between the printhead and the platen).
WIDE
When the "Others" is selected in the PAPER TYPE of the CUSTOM PAPER menu, the platen gap designated at
the CUSTOM PAPER menu has a priority over the setting made here. Refer to
WIDER
WIDEST
ON
Sets whether to print a page line (line for manual cutting) on roll paper or not. The page line is printed when ON
is selected.
The vertical line may be printed when the roll paper width that is set in the printer driver is smaller than the
OFF
width of the roll paper that is loaded in the printer. This setting is available for roll paper only.
Control Panel
Explanation
"PG Settings List" on page
Revision I
Applied
model
√
√
√
71.
√
√
√
58
Confidential