Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
5.4.7 Auto Bi-D Adjustment
Use this to perform an automatic Bi-D adjustment using the Ink Mark Sensor. After
adjustment pattern is printed, the printer will automatically scan the pattern and correct
misalignment.
PAPER USED
Epson Stylus Pro 9700/9710/9900/9910/9890/9908: 44 inches
Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/WT7900/WT7910/
7890/7908:
Type:
Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/
9910/9890/9908/7890/7908:
Doubleweight Matte Paper
Epson Stylus Pro WT7900/WT7910:
Premium Glossy Photo Paper (250)
PROCEDURE
1.
Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu
simultaneously.
→
2.
Select
SELF TESTING
Mecha Adjustment
3.
Press [OK] while
[Enter] Print
The adjustment pattern will be printed.
4.
After the pattern was printed, the printer will automatically scan the pattern and
correct misalignment (no need to adjust it manually).
5.
Turn the printer OFF.
ADJUSTMENT
24 inches
] + [Paper Feed
] + [OK]
→
→
Gap Adj
Auto
is displayed.
Bi-D.
Head Related Adjustments
Figure 5-38. Adjustment Pattern
Revision I
384
Confidential