Presetting Fax Protocol
Setting Other Data
To configure the following parameters, please refer to 4.9.1 Configure Gateway Units (KX-
TDA0480) of IP Gateway Card Installation Manual.
•
Trunk priority
•
Voice mode
•
Network
•
Call Control
•
SNMP
•
Recovery delay
•
Notify e-mail
•
Priority routing information
4.4 Configuring Office Data
a.
Click the "FAX related" tab.
b.
Select "TCP" (default) or "UDP", then click
[OK].
a.
Click the "Other" tab.
b.
Select "A-law" or "m-law" (default) for "A-
law/m-law flag"depending on the area in
which the IP Gateway Card is used, then
click [OK].
Getting Started
31