Page 1
SERVICE MANUAL PLASMA DISPLAY MONITOR 52149 2003 GM-V42PCE, GM-V42PCEB, GM-V42PCEG, GM-V42S, GM-V42UB, GM-V42UG BASIC CHASSIS RM-C579 REMOTE CONTROL UNIT POWER DISPLAY ASPECT INPUT SELECT COMPO. /(RGB B) VIDEO RGB A MUTING VOLUME MENU/EXIT MENU INPUT POWER TABLE OF CONTENTS PRECAUTION............... . . 1-4 SPECIFIC SERVICE INSTRUCTIONS .
SPECIFICATION Contents Items GM-V42PCE, GM-V42PCEB (Silver) GM-V42PCEG (Gray) Type Plasma display Dimension (W × H × D) 103.5cm × 64.0cm × 8.9cm Mass 35.1kg Video System VIDEO A/B NTSC3.58, NTSC4.43, PAL, PAL60, SECAM COMPONENT 480i, 576i, 480p, 576p, 760/60p, 1080/50i, 1080/60i(1035/60i)
Page 3
Contents Items GM-V42S (Silver) GM-V42UB (Silver), GM-V42UG (Gray) Type Plasma display Dimension (W × H × D) 103.5cm × 64.0cm × 8.9cm (40-3/4" × 25-1/4" × 3-5/8") Mass 35.1kg (77.4 lbs) Video System VIDEO A/B NTSC3.58, NTSC4.43, PAL, PAL60, SECAM NTSC3.58 COMPONENT 480i, 576i, 480p, 576p, 720/60p, 1080/50i, 1080/60i (1035/60i) Power Requirements...
Page 4
SECTION 1 PRECAUTION SAFETY PRECAUTIONS (1) The design of this product contains special hardware, (7) Isolation Check (Safety for Electrical Shock Hazard) many circuits and components specially for safety After re-assembling the product, always perform an purposes. For continued protection, no changes should be isolation check on the exposed metal parts of the cabinet made to the original design unless authorized in writing by (antenna terminals, video/audio input and output terminals,...
Page 5
INSTALLATION 1.2.1 REQUIREMENTS FOR SETTING The following minimum space must be kept when a PDP is installed. (The recommended distance should be from the most projected portion when a PDP is inclined.) An insufficient space reduces cooling efficiency and raises the internal temperature. If the internal temperature rises over the reference value, the temperature sensor works to turn the power off for protecting the main body.
Page 6
1.2.2 PRECAUTION DURING NOTES FOR TRANSPORTATION 1.2.4 RETAINED-IMAGE / BURN-IN ON SCREEN When transporting the display unit, pressure exerted on the Like CRTs, "burn-ins" may occur when a same image is internal PDP (Plasma Display Panel) due to improper handing continuously displayed over an extended period of time.