Panasonic KX-TAW848 Feature Manual page 224

1.19 V
b)
Intercept Routing to a Mailbox of the VPS
The PBX sends a mailbox number of the corresponding extension to the VPS when a CO line call
is intercepted from an extension to the VPS. Therefore the caller can leave a message for the
called extension without knowing the mailbox number.
[Intercept Routing to the VPS Sequence Selection]
If an extension user sets Intercept Routing to the VPS, the intercepted CO line calls will be
redirected to the VPS.
It is also possible to send the AA command, even in the VM service mode, when calls are
intercepted so that the caller can be directed to an extension rather than a mailbox. This can be
performed by selecting "AA" through system programming.
→ 2.9.18 [3-8-1] VM(DTMF) Group—System Settings—Others—Intercept Routing to the VPS
Sequence
Parameter
Answer by Mailbox
AA
None (Default)
[Example of a) & b)]
CO Line Call
Operator
c)
Transferring to a Mailbox of the VPS
An extension user can transfer a call to a mailbox of the VPS so that the caller can leave a message
in the mailbox of the desired extension. (→ 1.3.8 Call Transfer) The extension user should use the
Voice Mail (VM) Transfer button, when transferring a call to the mailbox of the VPS. When the
extension user presses this button and enters the desired extension number, the PBX will transfer
the call to the VM group and dial the mailbox number of the desired extension with the required
command (after the VPS answers the call). Therefore the caller can leave a message without
knowing the mailbox number.
2.10.4 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
224 Feature Manual
In AA Service Mode
Switching to VM command +
Recording message command (#6
+ H [H = Mailbox No.])
Switching to AA command (#8)
(DTMF commands are not sent. Work with default of the VPS.)
PBX
FWD, Intercept
Transfer
Extn. 102
Transmitted Command
Recording message command (H
[H = Mailbox No.])
Switching to AA command (#8)
Sent "#6" + "102".
mailbox number
Switching to VM command
VPS (In AA service mode)
VM Port 1
VM (DTMF)
Group
VM Port X
In VM Service Mode
VM Port 2
VM Port 3