Wall Mounting - Panasonic KX-A405 Installation Manual

Note:
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become disconnected.
L The unit can support a maximum of 2 calls including intercom calls at a time.
L When the & indicator flashes green rapidly on this unit, a handset registered to the
unit cannot make/receive a call through this unit. Neither can a handset during a
conversation within the base unit range switch to the DECT repeater range.
L Do not use more than 2 DECT repeaters at a time.
L Cascade connections are not available.

Wall Mounting

Note:
L Make sure that the wall is strong enough to support the weight of the unit.
1
Place the reference for wall mounting on the wall to mark the 2 screw
positions.
2
Install the 2 screws and washers (included) into the wall.
L Make sure that the screw heads are at the same distance from the wall.
L Install the screws perpendicular to the wall.
3
Hook the DECT repeater on the screw heads.
12
Washer
Drive the screw
to this point.