Live Menu - GE Digi-4 Installation Manual

Live menu

The first submenu is the Live menu (Figure 4). Navigate through
the menu items by pressing the Up and Down buttons. You can
change the value of a menu item by pressing the Left and Right
buttons.
Table 4. Live menu options
Item
OSD
Sequence
Seq-dwell time
Screen cropping
Event beep
OSD contrast
Channel
Display
Seq list
Brightness
Contrast
Hue
Description
Enable or disable the onscreen display.
Enable or disable the sequential display of video
channels in full screen mode.
Dwell time for each channel displayed in
sequence.
Enable or disable cropping to make the display fit
into the screen.
Enable or disable a beep when an event occurs.
Set the visibility of the onscreen display.
Select the channel to apply the following settings
to. Can display a name of up to 12 characters.
Enable or disable display of the video channel in
live display mode.
Enable or disable the specified channel to be
included in sequence mode.
Change the brightness value for the specified
channel.
Change the contrast value for the specified
channel.
Change the hue value for the specified channel.
9