GE Digi-4 Installation Manual page 11

Table 3. Rear panel connections (continued)
Connection
Sensor in
Alarm out
LAN
DC 12V
Switches
PAL
VGA
CAUTION
CAUTION
Purpose
Four connections for sensor input. Normally open
or normally closed can be selected as the sensor.
One connection for alarm output. Provides simple
on/off switching with a relay (0.5 A, 125V)
One RJ45 connection for LAN connectivity.
One connection for 12 VDC power input cable,
provided.
Set to ON when video is PAL.
Set to ON when using a VGA monitor.
Before disconnecting power from the Digia, make sure
to stop any operations that access the hard drive, such
as recording or playing back video.
7